User`s guide

Displaying 5
InfiniiVision Oscilloscopes User’s Guide 183
Using Labels
You can define labels and assign them to each analog input channel, or you can turn
labels off to increase the waveform display area. Labels can also be applied to digital
channels on MSO models.
To turn the label display on or off
1 Press the [Label] key on the front panel.
This turns on display labels for the analog and digital channels. When the [Label] key
is illuminated, the labels for displayed channels are displayed at the left edge of the
displayed traces. The figure below shows an example of the default labels assigned
when you turn the label display on. The channel labels default to their channel
number.
2 To turn the labels off, press the [Label] key until it is not illuminated.