User`s guide

Triggering 4
InfiniiVision Oscilloscopes User’s Guide 125
15 Press the WS Low softkey to select whether WS Low indicates Left or Right channel
data. The on-screen diagram changes with your selection.
WS Low = Left Channel: Left-channel data corresponds to WS=low; right-channel
data corresponds to WS=high. WS Low=Left is the oscilloscope’s default WS setting.
WS Low = Right Channel: Right-channel data corresponds to WS=low; left-channel
data corresponds to WS=high.
16 Press the SCLK Slope softkey to select the SCLK edge on which data is clocked in
your device under test: either rising or falling. The on-screen diagram changes with
your selection.
17 Press the up arrow softkey.
18 Press the Trigger Setup softkey.
19 Press the Audio softkey and rotate the Entry knob to choose to trigger on Left channel
events, Right channel events, or events that occur on Either channel.
LH
H8A@
H96I6
A:;I8=6CC:A G><=I8=6CC:A
DC:H8A@8N8A:
BH7 AH7
& ' c"' c"&
%
BH7 AH7
& ' c"' c"&
%
LH
H8A@
H96I6
A:;I8=6CC:A G><=I8=6CC:A
DC:H8A@8N8A:
BH7 AH7
& ' c"' c"&
%
BH7 AH7
& ' c"' c"&
%
Channel for
triggering
Trigger
qualifier
Return to
previous menu
Base
Data value