User`s guide

4 Triggering
106 InfiniiVision Oscilloscopes User’s Guide
You can select analog channel 1 or 2, Ext, or Line as the trigger source on any Agilent
InfiniiVision oscilloscope. The trigger source can also be set to channel 3 and 4 on the
4-channel oscilloscopes, or digital channels D15 through D0 on the mixed-signal
oscilloscopes. You can choose a channel that is turned off (not displayed) as the
source for the edge trigger.
The selected trigger source is indicated in the upper-right corner of the display next to
the slope symbol:
1 through 4 = analog channels
D0 through D15 = digital channels
E = External trigger
L = Line trigger