Technical data

10 Verifying LIN Serial Bus Communication
56 Agilent InfiniiVision 7000B Series Oscilloscopes Evaluation Guide
Notice the first byte in the serial decode string is sometimes shown in
red. This is the frame ID field. When this field is displayed in red, it is an
indication of a parity error in the header field of this frame. To analyze
transmitted data both before and after this particular frame (21 hex), let’s
turn on the “Lister” display mode. But first, let’s re-scale the timebase to
10.0 ms/div in order to capture several LIN frames on-screen.
16 Set the timebase to 10.0 ms/div.
17 Press [Serial]; then, press Lister.
18 Next, press Lister Display to turn on the Lister display mode.