Technical data

Agilent InfiniiVision 7000B Series Oscilloscopes Evaluation Guide 5
connecting a USB cable between it and the Agilent InfiniiVison
7000B Series oscilloscope.
2 Connect the oscilloscope channel 1 probe to demo board CH1 and GND.
Connect the oscilloscope channel 2 probe to demo board CH2 and GND.
3 Connect the MSO ribbon cable to the back of the oscilloscope as shown
below.
4 Plug the other end into the demo board as shown below.
Power is provided via
MSO or USB cable.
Oscilloscope Probe Connections
MODE Action
Select Knob
MSO Cable Connection
(Digital Inputs)