Technical data

Verifying SPI Serial Bus Communication 7
Agilent InfiniiVision 7000B Series Oscilloscopes Evaluation Guide 41
The oscilloscope should now be triggering on a stable serial pattern
showing a 3-cycle “chirp” on the oscilloscope’s display. Let’s now set up
the oscilloscope to display the decoded SPI data in a “lister” format.
15 Press [Serial].
16 Press Lister.
17 Press Lister Display to turn on the Lister display mode.
18 To scroll through a stored list of SPI packets, first press [Run/Stop] to
stop acquisitions.