Technical data
4 Agilent InfiniiVision 7000B Series Oscilloscopes Evaluation Guide
2. FAST — 100,000 Waveforms Per Second.
Have you turned your oscilloscope’s deep memory on only to have the
controls become sluggish and unresponsive? If so, you’ve experienced the
impact of architecture on performance. While it may be annoying to wait for
new settings to take effect on your oscilloscope, this same architecture
limitation has a more significant impact. While processing and drawing
waveforms the oscilloscope is blind to target signal changes. Infrequent
anomalies and critical signal detail are likely to be missed.
Patented MegaZoom III technology provides up to 100,000 waveforms
(acquisitions) per second with responsive deep memory always available.
See a display more representative of the actual signals under test than with
any other oscilloscope. Turn knobs and the instrument responds instantly
and effortlessly. Decoding serial packets? Unlike other oscilloscopes that
become less responsive and are blind to target signal changes while
employing software-based serial decode, Agilent’s hardware-accelerated
decode allows the product to stay responsive and does not compromise
update rate.
3. SMART — Insightful Applications.
Upgrade your general purpose oscilloscope with a wide range of application
packages provide meaningful insight into application-specific problems.
These include:
• Mask Testing.
• Segmented memory.
• Serial triggering with hardware-accelerated decode for: I
2
C, SPI,
RS-232/UART, CAN, LIN, FlexRay , I
2
S, and MIL-STD 1553.
• Core-assisted FPGA debug for Altera and Xilinx devices.
• PC-based offline analysis of previously acquired DSO/MSO data.
• Power measurements.
Demo Equipment and Set Up
Required Equipment
• Agilent InfiniiVison 7000B Series oscilloscope.
• Two passive probes.
• Demo kit with demo board, USB cable, and MSO Demo board cable.
Demo Board Set Up
1 To power the demo board, connect the oscilloscope’s MSO cable to the
demo board’s 40-pin connector. You can also power the demo board by