Technical data

Verifying I
2
C Serial Bus Communication 6
Agilent InfiniiVision 7000B Series Oscilloscopes Evaluation Guide 37
The oscilloscope should now be triggering on a Write operation to
Address 50 hex with an Acknowledge (50WA), followed by a data byte
value of 10 hex with an acknowledge (10A). This particular trigger
condition is coincident with a transmission of a 3-cycle analog chirp
shown on channel 1 (yellow waveform) and channel 2 (green waveform).
Let’s now view the I
2
C decoded data in the “lister” format.
15 Press [Serial].
16 Press Lister.
17 Next, press Lister Display to turn on the Lister display mode.