Technical data

Characteristics and Specifications 1
7000 Series Oscilloscopes Service Guide 17
Environmental Conditions
Environment Indoor use only.
Ambient temperature Operating 0 °C to +55 °C;
non-operating –40 °C to +70 °C
Humidity Operating 95% RH at 40 °C for 24 hr; non-operating
90% RH at 65 °C for 24 hr
Altitude Operating to 4,570 m (15,000 ft); non-operating to
15,244 m (50,000 ft)
Overvoltage Category This product is intended to be powered
by MAINS that comply to Overvoltage Category II, which is
typical of cord-and-plug connected equipment.
Pollution Degree The InfiniiVision 7000 Series Oscilloscope
may be operated in environments of Pollution Degree 2 (or
Pollution Degree 1).
Pollution Degree Definitions Pollution Degree 1: No pollution or
only dry, non-conductive pollution occurs. The pollution has no
influence. Example: A clean room or climate controlled office
environment.
Pollution Degree 2. Normally only dry non-conductive pollution
occurs. Occasionally a temporary conductivity caused by
condensation may occur. Example: General indoor
environment.
Pollution Degree 3: Conductive pollution occurs, or dry,
non-conductive pollution occurs which becomes conductive due
to condensation which is expected. Example: Sheltered outdoor
environment.
7000 service guide.book Page 17 Thursday, October 16, 2008 12:18 PM