Product data

CAN/LIN triggering and decode (N5424A or Option AMS on new scope purchases)
Trigger on and decode serially transmitted data based on CAN and LIN protocols. This ap-
plication not only provides triggering on complex serial signals, but it also provides unique
hardware-accelerated capabilities. Hardware-accelerated triggering and decode means the
scope stays responsive and fast
This application requires a 4-channel DSO or 4-channel MSO and can use any combination of
scope or logic acquisition channels.
For more information: www.agilent.com/fi nd/CAN-LIN.
FlexRay triggering and decode (N5432A or Option FRS on new scope purchases)
FlexRay protocol is based on time-triggered and deterministic architecture. Agilent’s FlexRay
solution for the 7000 Series mixed signal oscilloscopes offers a robust set of FlexRay frame,
slot, and error triggering, including the ability to trigger on specifi c FlexRay communications
qualifi ed on base-cycle and cycle-repetition. This solution combines an Agilent 7000 Series
mixed signal oscilloscope (MSO) with an Agilent VPT 1000 vehicle protocol tester for FlexRay
protocol analyzer.
This application requires a 4-channel MSO.
For more information: www.agilent.com/fi nd/fl exray
Trigger on and decode CAN serial packets.
See mixed signal measurements in a FlexRay
system using an MSO.
Software applications
FPGA dynamic probe application (N5406A for Xilinx, N5434A for Altera)
Give your MSO internal FPGA visibility. Agilent’s MSO FPGA dynamic probe provides internal
FPGA visibility and quick instrument setup using an innovative core-assisted debug approach.
Measurement tasks that previously took hours can be done in a few mouse clicks. In a few
seconds, easily measure a different set of internal signals without changing your FPGA design.
For more information:
www.agilent.com/fi nd/7000-altera
www.agilent.com/fi nd/7000-xilinx
Power application (U1881A)
Need to make power measurements with your scope? Agilent’s power application provides a
full suite of power measurements that run on a PC connected to an Infi niiVision 7000 Series
oscilloscope. Make more accurate power supply effi ciency measurements by using an U1880A
deskew fi xture to deskew your voltage and current probes.
For more information: www.agilent.com/fi nd/power-app
Debug and validate your FPGA designs
faster and more effectively with the FPGA
dynamic probe and an Agilent MSO.
Use your scope to quickly make and
analyze power measurements.
9
On-screen serial decode of an SPI packet
I
2
S triggering and decode(Option SND or N5468A)
Find and debug intermittent errors and signal integrity problems faster on I2S audio
protocol devices. This application offers powerful triggering and our unique hardware-
accelerated decode and lister window so you can more easily fi nd errors you could miss
using other serial bus decode tools.
This application requires a 4 channel DSO or MSO model
For more information: www.agilent.com/fi nd/I2S