Technical data

Commands by Subsystem 5
Agilent InfiniiVision 6000 Series Oscilloscopes Programmer's Guide 599
:TRIGger:SPI:SOURce:CLOCk
(see page 798)
Command Syntax
:TRIGger:SPI:SOURce:CLOCk <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital0,..,DIGital15} for the MSO models
<n>::={1|2|3|4}forthefour channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:SPI:SOURce:CLOCk command sets the source for the SPI
serial clock.
Query Syntax
:TRIGger:SPI:SOURce:CLOCk?
The :TRIGger:SPI:SOURce:CLOCk? query returns the current source for the
SPI serial clock.
Return Format
<source><NL>
See Also • "Introduction to :TRIGger Commands" on page 479
• ":TRIGger:SPI:CLOCk:SLOPe" on page 594
• ":TRIGger:SPI:CLOCk:TIMeout" on page 595
• ":TRIGger:SPI:SOURce:FRAMe" on page 601
• ":TRIGger:SPI:SOURce:DATA" on page 600