Technical data

Table Of Contents

Commands by Subsystem 5

Agilent InfiniiVision 6000 Series Oscilloscopes Programmer's Guide 537

:TRIGger:GLITch:SOURce

(see page 798)

Command Syntax

:TRIGger:GLITch:SOURce <source>

<source> ::= {CHANnel<n> | EXTernal} for the DSO models

<source> ::= {DIGital0,..,DIGital15 | CHANnel<n>} for the MSO models

<n>::={1|2|3|4}forthefour channel oscilloscope models

<n> ::= {1 | 2} for the two channel oscilloscope models

The :TRIGger:GLITch:SOURce command selects the channel that produces

the pulse width trigger.

Query Syntax

:TRIGger:GLITch:SOURce?

The :TRIGger:GLITch:SOURce? query returns the current pulse width

source. If all channels are off, the query returns "NONE."

Return Format

See Also • "Introduction to :TRIGger Commands" on page 479

• ":TRIGger:MODE" on page 485

• ":TRIGger:GLITch:LEVel" on page 533

• ":TRIGger:GLITch:POLarity" on page 534

• ":TRIGger:GLITch:QUALifier" on page 535

• ":TRIGger:GLITch:RANGe" on page 536

Example Code • "Example Code" on page 516