Technical data

44 Agilent InfiniiVision 6000 Series Oscilloscopes Programmer's Guide
1 What's New
Changed
Commands
:HARDcopy:PALette (see page 301) Sets the hardcopy palette color. Replaces the
5462x/4x :HARDcopy:GRAYscale (see
page 722) command.
:OPERegister:CONDition? (see page 177) Returns the integer value contained in the
Ta b l e 5 2 (a new register in addition to the
Ta b l e 5 3 whose value is returned by the
:OPERegister[:EVENt]? (see page 179) query).
:POD<n>:SIZE (see page 406) Specifies the size of digital channels on the
display.
:TIMebase:VERNier (see page 475) Specifies whether the time base control's
vernier (fine horizontal adjustment) setting is
ON (1) or OFF (0).
Command Description
Command Differences From 5462x/4x Oscilloscopes
:ACQuire:COUNt (see page 197) The count can be set to any value from 1 to
65536 (instead of 16383).
:DISPlay:DATA (see page 259) The BMP8bit <format> option has been added
to the query. There is a new <palette> option
which can be MONochrome, GRAYscale, or
COLor in the query, or just MONochrome in the
command.
:DISPlay:SOURce (see page 264) The number of pixel memory locations is 10
(instead of 3).
:HARDcopy:FORMat (see page 721) There is now the BMP8bit format (instead of
TIFF) and the PRINter0 or PRINter1 formats (in
place of LASerjet, DESKjet, EPSon, or SEIKo).
See the new :HARDcopy:PDRiver (see
page 724) command for setting the hardcopy
printer driver.
*LRN (see page 135)The Learn Device Setup query return format
matches the IEEE 488.2 specification which
says that the query result must contain
":SYST:SET " before the binary block data.
(This was not the case in the 5462x/4x
oscilloscopes.)
:MERGe (see page 170) The number of pixel memory locations is 10
(instead of 3).
*OPT (see page 137) The Option Identification query return format
now has license information (in addition to the
I/O module ID information fields which are
now always zero).