Technical data

406 Agilent InfiniiVision 6000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:POD<n>:SIZE
(see page 798)
Command Syntax
:POD<n>:SIZE <value>
<n> ::= An integer, 1 or 2, is attached as a suffix to the command and
defines the group of channels that are affected by the command.
POD1 ::= D0-D7
POD2 ::= D8-D15
<value> ::= {SMALl | MEDium | LARGe}
The :POD<n>:SIZE command specifies the size of digital channels on the
display.
Query Syntax
:POD<n>:SIZE?
The :POD<n>:SIZE? query returns the size setting for the specified group of
channels.
Return Format
<size_value><NL>
<size_value> ::= {SMAL | MED | LARG}
See Also • "Introduction to :POD<n> Commands" on page 404
• ":DIGital<n>:SIZE" on page 254
• ":DIGital<n>:POSition" on page 253
NOTE
This command is only valid for the MSO models.