Technical data

Table Of Contents

Commands by Subsystem 5

Agilent InfiniiVision 6000 Series Oscilloscopes Programmer's Guide 363

:MEASure:VPP

(see page 798)

Command Syntax

:MEASure:VPP [<source>]

<source> ::= {CHANnel<n> | FUNCtion | MATH}

<n>::={1|2|3|4}forthefour channel oscilloscope models

<n> ::= {1 | 2} for the two channel oscilloscope models

The :MEASure:VPP command installs a screen measurement and starts a

vertical peak-to- peak measurement. If the optional source parameter is

specified, the current source is modified.

Query Syntax

:MEASure:VPP? [<source>]

The :MEASure:VPP? query measures the maximum and minimum vertical

value for the selected source, then calculates the vertical peak- to- peak

value and returns that value. The peak-to- peak value (Vpp) is calculated

with the following formula:

Vpp = Vmax - Vmin

Vmax and Vmin are the vertical maximum and minimum values present on

the selected source.

Return Format

<value> ::= vertical peak to peak value in NR3 format

See Also • "Introduction to :MEASure Commands" on page 324

• ":MEASure:SOURce" on page 349

• ":MEASure:VMAX" on page 361

• ":MEASure:VMIN" on page 362

• ":MEASure:VAMPlitude" on page 358