Technical data

Table Of Contents

Commands by Subsystem 5

Agilent InfiniiVision 6000 Series Oscilloscopes Programmer's Guide 235

:CHANnel<n>:IMPedance

(see page 798)

Command Syntax

:CHANnel<n>:IMPedance <impedance>

<impedance> ::= {ONEMeg | FIFTy}

<n>::={1|2|3|4}forthefour channel oscilloscope models

<n> ::= {1 | 2} for the two channel oscilloscope models

The :CHANnel<n>:IMPedance command selects the input impedance setting

for the specified analog channel. The legal values for this command are

ONEMeg (1 M

Ω) and FIFTy (50Ω).

Query Syntax

:CHANnel<n>:IMPedance?

The :CHANnel<n>:IMPedance? query returns the current input impedance

setting for the specified channel.

Return Format

<impedance value> ::= {ONEM | FIFT}

See Also • "Introduction to :CHANnel<n> Commands" on page 230

NOTE

The analog channel input impedance of the 100 MHz bandwidth oscilloscope models is

fixed at ONEMeg (1 M

Ω).