Technical data

166 Agilent InfiniiVision 6000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:HWERegister:CONDition (Hardware Event Condition Register)
(see page 798)
Query Syntax
:HWERegister:CONDition?
The :HWERegister:CONDition? query returns the integer value contained in
the Hardware Event Condition Register.
Return Format
<value><NL>
<value> ::= integer in NR1 format.
See Also • "Introduction to Root (:) Commands" on page 153
• ":CHANnel<n>:PROTection" on page 244
• ":EXTernal:PROTection" on page 273
• ":OPEE (Operation Status Enable Register)" on page 175
• ":OPERegister[:EVENt] (Operation Status Event Register)" on page 179
To HWE bit in
Operation Status
Condition Register
+
OR
Bat
ON
:HWERegister:CONDition?
Hardware Event Condition Register
:HWEenable
:HWEenable?
Hardware Event Enable (Mask) Register
1023456798101112131415
:HWERegister[:EVENt]?
Hardware Event Event Register
PLL
Locked
0
Bat
ON
PLL
Locked
12
Table 47 Hardware Event Condition Register
Bit Name Description When Set (1 = High = True), Indicates:
15-13 --- --- (Not used.)
12 PLL
Locked
PLL Locked This bit is for internal use and is not intended
for general use.
11-1 --- --- (Not used.)
0 Bat On Battery On The battery is on.