Product data

Software applications
I
2
C/SPI serial trigger and decode (N5423A
or Option LSS on new scope purchases)
This application displays real-time time-aligned
decode of I
2
C and SPI serial buses. Hardware-ac-
celerated decode means the scope stays
responsive and fast.
This application requires a 4-channel DSO or 4-
channel MSO and can use any combination of the
scope or logic acquisition channels.
For more information:
www.agilent.com/fi nd/I
2
C-SPI
CAN/LIN triggering and decode (N5424A or
Option AMS on new scope purchases)
Trigger on and decode serially transmitted data
based on CAN and LIN protocols. This application
not only provides triggering on complex serial
signals, but it also provides unique hardware-
accelerated capabilities. Hardware-accelerated
triggering and decode means the scope stays
responsive and fast.
This application requires a 4-channel DSO or
4-channel MSO and can use any combination of
scope or logic acquisition channels.
For more information:
www.agilent.com/fi nd/CAN-LIN
FlexRay triggering and decode (N5432A or
Option FRS on new scope purchases)
FlexRay protocol is based on time-triggered and
deterministic architecture. Agilent’s FlexRay solu-
tion for the 7000 Series mixed signal oscilloscopes
offers a robust set of FlexRay frame, slot, and
error triggering, including the ability to trigger
on specifi c FlexRay communications qualifi ed on
base-cycle and cycle-repetition. This
solution combines an Agilent 7000 Series mixed
signal oscilloscope (MSO) with an Agilent VPT
1000 vehicle protocol tester for FlexRay protocol
analyzer.
This application requires a 4-channel MSO.
For more information:
www.agilent.com/fi nd/fl exray
RS-232/UART serial decode and trigger (N5457A
or Option 232 on new scope purchases)
Does your design include RS-232 or another type
of UART? This application eliminates the need to
manually decode bus traffi c. Using data captured
on the scope or logic channels, the application lets
you easily view the information sent over a RS-232
or other UART serial bus.
Display real-time time-aligned decode of transmit
and receive lines. The application also enables
triggering on RS-232/UART conditions.
This application requires a 4-channel DSO or 4-
channel MSO and can use any combination of the
scope or logic acquisition channels.
For more information:
www.agilent.com/fi nd/RS-232
View on-screen serial decode of an I
2
C packet.
Trigger on and decode RS-232/UART
transmission.
Trigger on and decode CAN serial packets.
See mixed signal measurements in a
FlexRay system using an MSO.
8