Product data

Other useful features
High resolution mode. Offers up to 12 bits of
vertical resolution in real-time, single-shot mode.
This is accomplished by serially fi ltering sequential
data points and mapping the fi ltered results to
the display when operating at time base settings
greater than 10-µs/div.
Help is at your fi ngertips. An embedded help
system – available in 11 languages – gives you
quick answers if you don’t understand a feature.
Simply press and hold the corresponding front-
panel key, and a screen pops up to explain its
function.
Waveform math with FFT. Analysis functions
include subtract, multiply, integrate, square root,
and differentiate, as well as fast Fourier
transforms (FFT).
Peak detect. 250 ps on 500-MHz and 1-GHz
models, 500 ps on 350-MHz models. Helps you
fi nd narrow glitches.
AutoProbe interface. Automatically sets
probe attenuation factors and provides power for
selected active probes, including the award-
winning 1130A 1.5-GHz Infi niiMax differential
active probe and 1156A 1.5-GHz single-ended
active probe systems.
5-digit hardware counter. Measures frequency
up to the bandwidth of the scope and provides
accurate and repeatable results. Can be increased
to 8 digits with an external 10 MHz reference.
Trig Out and Reference Clock In/Out. Pro-
vides an easy way to synchronize your scope to
other instruments. Use the Trig Out port to connect
your scope to a frequency counter for more ac-
curate frequency measurements or to cross trigger
other instruments.
Autoscale. Displays all analog and digital active
signals, and automatically sets the vertical, hori-
zontal and trigger controls.
23 automatic measurements with QuickMeas.
Pressing [QuickMeas] brings up the last four
automated measurements selected. Cursors
automatically track the most recently selected
measurement.
Analog HDTV/EDTV trigger. The 7000 Series
comes standard with analog HDTV/EDTV trigger-
ing for standards like 1080i, 1080p, 720p and 480p
as well as standard video triggering on any line
within a fi eld, all lines, all fi elds and odd or even
fi elds for NTSC, SECAM, PAL and PAL-M video
signals.
Bus mode display (on MSO models). Quick
and easy read-out of hexadecimal or binary
representation of logic signals.
Easy software upgrades. System software is
stored in fl ash ROM that can be upgraded from the
scope’s built-in USB port or LAN. You can fi nd the
latest system and IntuiLink software at:
www.agilent.com/fi nd/7000sw
Press and hold a key for instant help.
FFT allows you to view the spectral
content of this clock signal.
Digital signals can be displayed
individually or as overlayed bus values.
5