Product data

Probes and accessories
Agilent offers a complete family of innovative passive and active probes for the InfiniiVision 7000
Series scopes helps you get your job done easily and accurately. Choosing the correct probe for your
application will help to ensure you accurately acquire signals. Below is a general guide on how to
choose the type of probe. For the most up-to-date information about Agilent’s accessories, please
visit our Web site at www.agilent.com/find/scope_probes.
Probe type Key characteristics
Passive probes: most common type of probe, rugged and economical with bandwidth generally lower than 600 MHz
10070C
10073C
1165A
1:1 20 MHz with probe ID
10:1 500 MHz with probe ID (standard with all 7000 Series scopes)
10:1 600 MHz with probe ID
High voltage passive probe: view up to 30 kVDC + peak AC voltage referenced to earth ground
10076A
N2771A
100:1, 4 kV, 250 MHz probe with ID
1000:1, 30 kV, 50 MHz probe
Single-ended active probes: contains small, active amplifier and enables the probe input capacitance to be very low resulting in high
input impedance on high frequencies. Least intrusive of all probes.
1156A
1144A
1145A
1.5 GHz AutoProbe interface
800 MHz (requires 1142A – power supply)
750 MHz 2-ch (requires 1142A – power supply)
Active differential probes: use to look at signals that are referenced to each others instead of earth ground and to look at small signals in
the presence of large DC offsets or other common mode signals such as power line noise.
1130A
N2772A
1141A
1.5 GHz InfiniiMax amplifier with AutoProbe interface (requires one
or more InfiniiMax probe head – E2675A, E2668A, E2669A)
20 MHz, 1.2 kVDC + peak AC max (requires N2773A power supply)
200 MHz, 200 VDC + peak AC max (requires 1142A power supply)
Current probes: sense the AC or DC current flowing through a conductor and convert it to a voltage that can be viewed and measured on
an oscilloscope. Compatible with 1 MΩ scope input.
1146A
1147A
N2780A
N2781A
N2782A
N2783A
100 kHz, 100 A, AC/DC
50 MHz, 30 A, AC/DC with AutoProbe interface
2 MHz, 500 A, AC/DC (use with N2779A power supply)
10 MHz, 150 A, AC/DC (use with N2779A power supply)
50 MHz, 30 A, AC/DC (use with N2779A power supply)
100 MHz, 30 A, AC/DC (use with N2779A power supply)
MSO probes: offer the best performance and access to the industry’s broad range of logic analyzer probing accessories
01650-61607
54620-68701
With this 40-pin logic cable, Agilent MSOs accept numerous logic
analyzer accessories such as Mictor, Samtec, flying leads or soft
touch connectorless probes.
Included with all MSO models is a logic probe with 2x8 flying
leads (includes 20 IC clips and five ground leads)
For more comprehensive information, refer to the Agilent 5000, 6000 and 7000 Series Oscilloscopes Probes and Accessories Data Sheet
and Selection Guide (Agilent publication numbers 5968-8153EN/ENUS and 5989-6162EN).
12