Oscilloscopes User's Guide

Displaying Data 6
6000 Series Oscilloscope User’s Guide 295
When the FlexRay mode is selected, you can use the Settings
softkey to access the VPT1000 Menu for changing the
VPT1000 control/operating modes.
4 If the decode line does not appear on the display, press the
Decode softkey to turn it on. The VPT1000 must be connected
and running in asynchronous or synchronous mode for a
meaningful display.
5 If the oscilloscope is stopped, press the Run/Stop key to
acquire and decode data.
You can use the Zoom horizontal sweep mode for easier
navigation of the decoded data.
NOTE
Changing the VPT1000 settings in the Serial Decode Menu also changes
them in the FlexRay Trigger Menu.