User`s guide

34 5000 Series Oscilloscope User’s Guide

1Getting Started

3 Enter your desired password.

4 Select the “Apply Changes” button.

To reset the password:

1 Press Utility & I/O & LAN Reset.

Printing the oscilloscope’s display from a web browser

To print the oscilloscope’s display from a web browser:

1 Establish a connection to the oscilloscope as described in

this chapter and go to the oscilloscope’s Welcome page.

2 Select the Get Image tab from the left side of the Welcome

screen. After a delay of several seconds, the oscilloscope’s

screen image will be displayed.

3 Right-click on the image and select “Save Picture As...”.

4 Select a storage location for the image file and click Save.

For more information about connecting the oscilloscope to a

LAN see the Agilent Technologies USB/LAN/GPIB Interfaces

Connectivity Guide. For a printable electronic copy of the

Connectivity Guide, direct your Web browser to