User`s guide

Saving and Printing Data 6
5000 Series Oscilloscope User’s Guide 269
Secure Environment Mode Option
Secure environment mode is compliant to National Industrial
Security Program Operating Manual (NISPOM) Chapter 8
requirements.
When you order your oscilloscope with the secure environment
mode option, trace and setup data are stored to internal volatile
memory (rather than internal non-volatile memory).
Oscilloscope setup, waveform, and trace data are erased when
the power is shut off. This ensures that any setup, waveform,
and trace data will not be visible to the next user upon
power-up. The clock, LAN, and GPIB settings are not discarded
upon power-down.
To permanently store data, you can save it to an external device
through one of the oscilloscope’s USB ports.
Secure environment mode can not be disabled.
Oscilloscopes equipped with the secure environment mode
option will have “SEC” displayed in the Installed Licenses line
of the “About Oscilloscope” display. To access the About
Oscilloscope display, press the Utility key, then press the Service
softkey, then press the About Oscilloscope softkey.