User`s guide

Displaying Data 5

5000 Series Oscilloscope User’s Guide 217

To decode I

C data

1 Select the I

C serial decode mode:

a Press the Acquire key.

b Press the Serial Decode softkey.

c In the Serial Decode Menu, press the Mode softkey.

d Use the Entry knob (or repeatedly press and release the

Mode softkey) to select the I

C serial decode mode.

NOTE

Because of oscilloscope hardware resource limitations, you cannot

decode I

C data while LIN triggering is selected.

NOTE

For I

C triggering setup see page 112.

Display

decode

Decode

mode

Signal

setup menu

Return to

previous menu