User`s guide

20 5000 Series Oscilloscope User’s Guide
1Getting Started
To adjust the handle
The oscilloscope’s handle can be locked in one of three
positions:
• up, for carrying
• back, so the handle is out of the way
• down, so the oscilloscope can be tilted back for easy viewing
when the oscilloscope is on the floor and you are standing
above it.
1 To rotate the handle, grasp the handle hubs on each side of
the instrument and pull the hubs out until they stop.
2 Without releasing the hubs, rotate the handle to the desired
position. Then release the hubs. Continue rotating the handle
until it clicks into a set position.