User`s guide

16 5000 Series Oscilloscope User’s Guide
1Getting Started
To get started using the oscilloscope:
✔ Unpack the oscilloscope and verify the contents.
✔ Adjust the oscilloscope’s handle position.
✔ Tilt the oscilloscope for easy viewing if desired.
✔ Apply power to the oscilloscope.
✔ Connect the probes to the oscilloscope.
✔ Verify basic oscilloscope operation and compensate the
probes.
To inspect package contents
✔ Inspect the shipping container for damage.
If your shipping container appears to be damaged, keep the
shipping container or cushioning material until you have
inspected the contents of the shipment for completeness and
have checked the oscilloscope mechanically and electrically.
✔ Verify that you received the following items and any optional
accessories you may have ordered:
• InfiniiVision 5000 Series Oscilloscope
• Front-panel cover
• Power cord (see Table 3 on page 23)
• Oscilloscope probes
• Two probes for 2-channel models
• Four probes for 4-channel models
• N2863A probes for 100 MHz and 300 MHz bandwidth
models
• 10073C probes for 500 MHz bandwidth models
• User’s Guide
• CD-ROM containing the Programmer’s Quick Start Guide,
Programmer’s Reference Guide, and Service Guide
• Automation-Ready Software CD-ROM