Technical data

86 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
:SBUS:I2S:BASE <base>
(see page 406)
:SBUS:I2S:BASE? (see
page 406)
<base> ::= {DECimal | HEX}
:SBUS:IIC:ASIZe
<size> (see page 407)
:SBUS:IIC:ASIZe? (see
page 407)
<size> ::= {BIT7 | BIT8}
:SBUS:LIN:PARity {{0
| OFF} | {1 | ON}}
(see page 408)
:SBUS:LIN:PARity?
(see page 408)
{0 | 1}
:SBUS:M1553:BASE
<base> (see page 409)
:SBUS:M1553:BASE?
(see page 409)
<base> ::= {DECimal | HEX}
:SBUS:MODE <mode>
(see page 410)
:SBUS:MODE? (see
page 410)
<mode> ::= {CAN | I2S | IIC | LIN
| SPI | UART}
:SBUS:SPI:BITorder
<order> (see
page 411)
:SBUS:SPI:BITorder?
(see page 411)
<order> ::= {LSBFirst | MSBFirst}
:SBUS:SPI:WIDTh
<word_width> (see
page 412)
:SBUS:SPI:WIDTh? (see
page 412)
<word_width> ::= integer 4-16 in
NR1 format
:SBUS:UART:BASE
<base> (see page 413)
:SBUS:UART:BASE? (see
page 413)
<base> ::= {ASCii | BINary | HEX}
n/a :SBUS:UART:COUNt:ERRo
r? (see page 414)
<frame_count> ::= integer in NR1
format
:SBUS:UART:COUNt:RESe
t (see page 415)
n/a n/a
n/a :SBUS:UART:COUNt:RXFR
ames? (see page 416)
<frame_count> ::= integer in NR1
format
n/a :SBUS:UART:COUNt:TXFR
ames? (see page 417)
<frame_count> ::= integer in NR1
format
:SBUS:UART:FRAMing
<value> (see
page 418)
:SBUS:UART:FRAMing?
(see page 418)
<value> ::= {OFF | <decimal> |
<nondecimal>}
<decimal> ::= 8-bit integer from
0-255 (0x00-0xff)
<nondecimal> ::= #Hnn where n ::=
{0,..,9 | A,..,F} for hexadecimal
<nondecimal> ::= #Bnn...n where n
::= {0 | 1} for binary
Table 17 :SBUS Commands Summary (continued)
Command Query Options and Query Returns