Technical data

80 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
:MEASure:VRMS
[<interval>][,][<sour
ce>] (see page 331)
:MEASure:VRMS?
[<interval>][,][<sour
ce>] (see page 331)
<interval> ::= {CYCLe | DISPlay |
AUTO}
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= calculated dc
RMS voltage in NR3 format
n/a :MEASure:VTIMe?
<vtime>[,<source>]
(see page 332)
<vtime> ::= displayed time from
trigger in seconds in NR3 format
<return_value> ::= voltage at the
specified time in NR3 format
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
:MEASure:VTOP
[<source>] (see
page 333)
:MEASure:VTOP?
[<source>] (see
page 333)
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= voltage at the
top of the waveform in NR3 format
:MEASure:WINDow
<window> (see
page 334)
:MEASure:WINDow? (see
page 334)
<window> ::= {MAIN | ZOOM | AUTO}
:MEASure:XMAX
[<source>] (see
page 335)
:MEASure:XMAX?
[<source>] (see
page 335)
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= horizontal
value of the maximum in NR3
format
:MEASure:XMIN
[<source>] (see
page 336)
:MEASure:XMIN?
[<source>] (see
page 336)
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= horizontal
value of the maximum in NR3
format
Table 13 :MEASure Commands Summary (continued)
Command Query Options and Query Returns