Technical data

686 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
7 Obsolete and Discontinued Commands
:MEASure:TSTOp
(see page 750)
Command Syntax
:MEASure:TSTOp <value> [suffix]
<value> ::= time at the stop marker in seconds
[suffix] ::= {s | ms | us | ns | ps}
The :MEASure:TSTOp command moves the stop marker (X2 cursor) to the
specified time with respect to the trigger time.
Query Syntax
:MEASure:TSTOp?
The :MEASure:TSTOp? query returns the time at the stop marker (X2
cursor).
Return Format
<value><NL>
<value> ::= time at the stop marker in NR3 format
See Also • "Introduction to :MARKer Commands" on page 275
• "Introduction to :MEASure Commands" on page 290
• ":MARKer:X1Position" on page 277
• ":MARKer:X2Position" on page 279
• ":MARKer:XDELta" on page 281
• ":MEASure:TDELta" on page 681
• ":MEASure:TSTArt" on page 685
NOTE
The short form of this command, TSTO, does not follow the defined Long Form to Short
Form Truncation Rules (see page 752). The normal short form "TST" would be the same for
both TSTArt and TSTOp, so sending TST for the TSTOp command produces an error.
NOTE
The :MEASure:TSTOp command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :MARKer:X2Position command (see page 279) instead.