Technical data

68 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
:CALibrate:STARt (see
page 198)
n/a n/a
n/a :CALibrate:STATus?
(see page 199)
<return value> ::=
ALL,<status_code>,<status_string
>
<status_code> ::= an integer
status code
<status_string> ::= an ASCII
status string
n/a :CALibrate:SWITch?
(see page 200)
{PROTected | UNPRotected}
n/a :CALibrate:TEMPeratur
e? (see page 201)
<return value> ::= degrees C
delta since last cal in NR3
format
n/a :CALibrate:TIME? (see
page 202)
<return value> ::=
<hours>,<minutes>,<seconds>; all
in NR1 format
Table 5 :CALibrate Commands Summary (continued)
Command Query Options and Query Returns
Table 6 :CHANnel<n> Commands Summary
Command Query Options and Query Returns
:CHANnel<n>:BWLimit
{{0 | OFF} | {1 |
ON}} (see page 206)
:CHANnel<n>:BWLimit?
(see page 206)
{0 | 1}
<n> ::= 1-2 or 1-4 in NR1 format
:CHANnel<n>:COUPling
<coupling> (see
page 207)
:CHANnel<n>:COUPling?
(see page 207)
<coupling> ::= {AC | DC}
<n> ::= 1-2 or 1-4 in NR1 format
:CHANnel<n>:DISPlay
{{0 | OFF} | {1 |
ON}} (see page 208)
:CHANnel<n>:DISPlay?
(see page 208)
{0 | 1}
<n> ::= 1-2 or 1-4 in NR1 format
:CHANnel<n>:IMPedance
<impedance> (see
page 209)
:CHANnel<n>:IMPedance
? (see page 209)
<impedance> ::= {ONEMeg | FIFTy}
<n> ::= 1-2 or 1-4 in NR1 format
:CHANnel<n>:INVert
{{0 | OFF} | {1 |
ON}} (see page 210)
:CHANnel<n>:INVert?
(see page 210)
{0 | 1}
<n> ::= 1-2 or 1-4 in NR1 format
:CHANnel<n>:LABel
<string> (see
page 211)
:CHANnel<n>:LABel?
(see page 211)
<string> ::= any series of 10 or
less ASCII characters enclosed in
quotation marks
<n> ::= 1-2 or 1-4 in NR1 format