Technical data

586 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:TRIGger:USB:SOURce:DMINus
(see page 750)
Command Syntax
:TRIGger:USB:SOURce:DMINus <source>
<source> ::= {CHANnel<n> | EXTernal}
<n>::={1|2|3|4}forthefour channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:USB:SOURce:DMINus command sets the source for the USB
D- signal.
Query Syntax
:TRIGger:USB:SOURce:DMINus?
The :TRIGger:USB:SOURce:DMINus? query returns the current source for
the USB D- signal.
Return Format
<source><NL>
See Also • "Introduction to :TRIGger Commands" on page 440
• ":TRIGger:MODE" on page 447
• ":TRIGger:USB:SOURce:DPLus" on page 587
• ":TRIGger:USB:TRIGger" on page 589