Technical data

562 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:TRIGger:SPI:SOURce:DATA
(see page 750)
Command Syntax
:TRIGger:SPI:SOURce:DATA <source>
<source> ::= {CHANnel<n> | EXTernal}
<n>::={1|2|3|4}forthefour channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:SPI:SOURce:DATA command sets the source for the SPI serial
data.
Query Syntax
:TRIGger:SPI:SOURce:DATA?
The :TRIGger:SPI:SOURce:DATA? query returns the current source for the
SPI serial data.
Return Format
<source><NL>
See Also • "Introduction to :TRIGger Commands" on page 440
• ":TRIGger:SPI:SOURce:CLOCk" on page 561
• ":TRIGger:SPI:SOURce:FRAMe" on page 563
• ":TRIGger:SPI:PATTern:DATA" on page 559
• ":TRIGger:SPI:PATTern:WIDTh" on page 560