Technical data

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 561
:TRIGger:SPI:SOURce:CLOCk
(see page 750)
Command Syntax
:TRIGger:SPI:SOURce:CLOCk <source>
<source> ::= {CHANnel<n> | EXTernal}
<n>::={1|2|3|4}forthefour channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:SPI:SOURce:CLOCk command sets the source for the SPI
serial clock.
Query Syntax
:TRIGger:SPI:SOURce:CLOCk?
The :TRIGger:SPI:SOURce:CLOCk? query returns the current source for the
SPI serial clock.
Return Format
<source><NL>
See Also • "Introduction to :TRIGger Commands" on page 440
• ":TRIGger:SPI:CLOCk:SLOPe" on page 556
• ":TRIGger:SPI:CLOCk:TIMeout" on page 557
• ":TRIGger:SPI:SOURce:FRAMe" on page 563
• ":TRIGger:SPI:SOURce:DATA" on page 562