Technical data

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 543
:TRIGger:M1553:RTA
(see page 750)
Command Syntax
:TRIGger:M1553:RTA <value>
<value> ::= 5-bit integer in decimal, <nondecimal>, or
<string> from 0-31
<nondecimal> ::= #Hnn where n ::= {0,..,9|A,..,F}
<string> ::= "0xnn" where n::= {0,..,9|A,..,F}
The :TRIGger:M1553:RTA command sets the Remote Terminal Address
(RTA) to trigger on if the trigger type has been set to RTA using the
:TRIG:M1553:TYPE command.
Query Syntax
:TRIGger:M1553:RTA?
The :TRIGger:M1553:RTA? query returns the current TV trigger line
number setting.
Return Format
<value><NL> in nondecimal format
See Also • "Introduction to :TRIGger Commands" on page 440
• ":TRIGger:M1553:TYPE" on page 546