Technical data

536 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide

5 Commands by Subsystem

:TRIGger:LIN:SOURce

(see page 750)

Command Syntax

:TRIGger:LIN:SOURce <source>

<source> ::= {CHANnel<n> | EXTernal}

<n>::={1|2|3|4}forthefour channel oscilloscope models

<n> ::= {1 | 2} for the two channel oscilloscope models

The :TRIGger:LIN:SOURce command sets the source for the LIN signal.

Query Syntax

:TRIGger:LIN:SOURce?

The :TRIGger:LIN:SOURce? query returns the current source for the LIN

signal.

Return Format

See Also • "Introduction to :TRIGger Commands" on page 440

• ":TRIGger:MODE" on page 447

• ":TRIGger:LIN:TRIGger" on page 539

• ":TRIGger:LIN:SIGNal:DEFinition" on page 705