Technical data

Commands by Subsystem 5

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 533

:TRIGger:LIN:PATTern:FORMat

(see page 750)

Command Syntax

:TRIGger:LIN:PATTern:FORMat <base>

<base> ::= {BINary | HEX | DECimal}

The :TRIGger:LIN:PATTern:FORMat command sets the entry (and query)

number base used by the :TRIGger:LIN:PATTern:DATA command. The

default <base> is DECimal.

Query Syntax

:TRIGger:LIN:PATTern:FORMat?

The :TRIGger:LIN:PATTern:FORMat? query returns the currently set

number base for LIN pattern data.

Return Format

<base> ::= {BIN | HEX | DEC}

See Also • "Introduction to :TRIGger Commands" on page 440

• ":TRIGger:LIN:PATTern:DATA" on page 530

• ":TRIGger:LIN:PATTern:DATA:LENGth" on page 532

NOTE

This command is only valid when the automotive CAN and LIN serial decode option (Option

AMS) has been licensed.