Technical data

522 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide

5 Commands by Subsystem

:TRIGger:IIC[:SOURce]:CLOCk

(see page 750)

Command Syntax

:TRIGger:IIC:[SOURce:]CLOCk <source>

<source> ::= {CHANnel<n> | EXTernal}

<n>::={1|2|3|4}forthefour channel oscilloscope models

<n> ::= {1 | 2} for the two channel oscilloscope models

The :TRIGger:IIC:[SOURce:]CLOCk command sets the source for the IIC

serial clock (SCL).

Query Syntax

:TRIGger:IIC:[SOURce:]CLOCk?

The :TRIGger:IIC:[SOURce:]CLOCk? query returns the current source for

the IIC serial clock.

Return Format

See Also • "Introduction to :TRIGger Commands" on page 440

• ":TRIGger:IIC[:SOURce]:DATA" on page 523