Technical data

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 513
:TRIGger:I2S:SOURce:WSELect
(see page 750)
Command Syntax
:TRIGger:I2S:SOURce:WSELect <source>
<source> ::= {CHANnel<n> | EXTernal}
<n>::={1|2|3|4}forthefour channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:I2S:SOURce:WSELect command controls which signal is used
as the word select (WS) source by the serial decoder and/or trigger when
in I2S mode.
Query Syntax
:TRIGger:I2S:SOURce:WSELect?
The :TRIGger:I2S:SOURce:WSELect? query returns the current source for
I2S word select (WS).
Return Format
<source><NL>
See Also • "Introduction to :TRIGger Commands" on page 440
• ":TRIGger:I2S:SOURce:CLOCk" on page 511
• ":TRIGger:I2S:SOURce:DATA" on page 512