Technical data

510 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:TRIGger:I2S:RWIDth
(see page 750)
Command Syntax
:TRIGger:I2S:RWIDth <receiver>
<receiver> ::= 4-32 in NR1 format
The :TRIGger:I2S:RWIDth command sets the width of the receiver
(decoded) data word in I2S anywhere from 4 bits to 32 bits.
Query Syntax
:TRIGger:I2S:RWIDth?
The :TRIGger:I2S:RWIDth? query returns the currently set I2S receiver data
word width.
Return Format
<receiver><NL>
<receiver> ::= 4-32 in NR1 format
See Also • "Introduction to :TRIGger Commands" on page 440
• ":TRIGger:I2S:ALIGnment" on page 502
• ":TRIGger:I2S:CLOCk:SLOPe" on page 504
• ":TRIGger:I2S:TWIDth" on page 516
• ":TRIGger:I2S:WSLow" on page 517