Technical data

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 507
:TRIGger:I2S:PATTern:FORMat
(see page 750)
Command Syntax
:TRIGger:I2S:PATTern:FORMat <base>
<base> ::= {BINary | HEX | DECimal}
The :TRIGger:I2S:PATTern:FORMat command sets the entry (and query)
number base used by the :TRIGger:I2S:PATTern:DATA command. The
default <base> is DECimal.
Query Syntax
:TRIGger:I2S:PATTern:FORMat?
The :TRIGger:I2S:PATTern:FORMat? query returns the currently set number
base for I2S pattern data.
Return Format
<base><NL>
<base> ::= {BIN | HEX | DEC}
See Also • "Introduction to :TRIGger Commands" on page 440
• ":TRIGger:I2S:AUDio" on page 503
• ":TRIGger:I2S:TRIGger" on page 514