Technical data

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 503
:TRIGger:I2S:AUDio
(see page 750)
Command Syntax
:TRIGger:I2S:AUDio <audio_ch>
<audio_ch> ::= {RIGHt | LEFT | EITHer}
The :TRIGger:I2S:AUDio command specifies the audio channel to trigger
on:
• RIGHt — right channel.
• LEFT— left channel.
• EITHer — right channel.
Query Syntax
:TRIGger:I2S:AUDio?
The :TRIGger:I2S:AUDio? query returns the current audio channel for the
I2S trigger.
Return Format
<audio_ch><NL>
<audio_ch> ::= {RIGH | LEFT | EITH}
See Also • "Introduction to :TRIGger Commands" on page 440
• ":TRIGger:I2S:TRIGger" on page 514