Technical data

502 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide

5 Commands by Subsystem

:TRIGger:I2S:ALIGnment

(see page 750)

Command Syntax

:TRIGger:I2S:ALIGnment <setting>

<setting> ::= {I2S | LJ | RJ}

The :TRIGger:I2S:ALIGnment command selects the data alignment of the

I2S bus for the serial decoder and/or trigger when in I2S mode:

• I2S — standard.

• LJ — left justified.

• RJ — right justified.

Note that the word select (WS) polarity is specified separately with the

:TRIGger:I2S:WSHigh command.

Query Syntax

:TRIGger:I2S:ALIGnment?

The :TRIGger:I2S:ALIGnment? query returns the currently selected I2S data

alignment.

Return Format

<setting> ::= {I2S | LJ | RJ}

See Also • "Introduction to :TRIGger Commands" on page 440

• ":TRIGger:I2S:CLOCk:SLOPe" on page 504

• ":TRIGger:I2S:RWIDth" on page 510

• ":TRIGger:I2S:TWIDth" on page 516

• ":TRIGger:I2S:WSLow" on page 517