Technical data

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 409
:SBUS:M1553:BASE
(see page 750)
Command Syntax
:SBUS:M1553:BASE <base>
<base> ::= {BINary | HEX}
The :SBUS:M1553:BASE command determines the base to use for the
MIL- STD 1553 decode display.
Query Syntax
:SBUS:M1553:BASE?
The :SBUS:M1553:BASE? query returns the current MIL- STD 1553 display
decode base.
Return Format
<base><NL>
<base> ::= {BIN | HEX}
Errors • "- 241, Hardware missing" on page 709
See Also • "Introduction to :SBUS Commands" on page 395
• ":TRIGger:M1553 Commands" on page 540
NOTE
This command is only valid on 4 (analog) channel oscilloscope models when the MIL-STD
1553 serial decode option (Option 553) has been licensed.