Technical data

4 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
Then, there are chapters that describe programming topics and conceptual
information in more detail:
• Chapter 9, Chapter 9, “Status Reporting,” starting on page 715,
describes the oscilloscope's status registers and how to check the status
of the instrument.
• Chapter 10, Chapter 10, “Synchronizing Acquisitions,” starting on page
739, describes how to wait for acquisitions to complete before querying
measurement results or performing other operations with the captured
data.
• Chapter 11, Chapter 11, “More About Oscilloscope Commands,” starting
on page 749, contains additional information about oscilloscope
programming commands.
Finally, there is a chapter that contains programming examples:
• Chapter 12, Chapter 12, “Programming Examples,” starting on page 775.
See Also • For more information on using the SICL, VISA, and VISA COM libraries
in general, see the documentation that comes with the Agilent IO
Libraries Suite.
• For information on controller PC interface configuration, see the
documentation for the interface card used (for example, the Agilent
82350A GPIB interface).
• For information on oscilloscope front-panel operation, see the User's
Guide.
• For detailed connectivity information, refer to the Agilent Technologies
USB/LAN/GPIB Connectivity Guide. For a printable electronic copy of
the Connectivity Guide, direct your Web browser to "www.agilent.com"
and search for "Connectivity Guide".
• For the latest versions of this and other manuals, see:
"http://www.agilent.com/find/5000manual"