Technical data

386 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:SAVE:LISTer[:STARt]
(see page 750)
Command Syntax
:SAVE:LISTer[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:LISTer[:STARt] command saves the Lister display data to a file.
See Also • "Introduction to :SAVE Commands" on page 378
• ":SAVE:FILename" on page 379
• ":LISTer Commands" on page 271
NOTE
If a file extension is provided as part of a specified <file_name>, it must be ".csv".