Technical data

336 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide

5 Commands by Subsystem

:MEASure:XMIN

(see page 750)

Command Syntax

:MEASure:XMIN [<source>]

<source> ::= {CHANnel<n> | FUNCtion | MATH}

<n>::={1|2|3|4}forthefour channel oscilloscope models

<n> ::= {1 | 2} for the two channel oscilloscope models

The :MEASure:XMIN command installs a screen measurement and starts

an X-at- Min-Y measurement on the selected window. If the optional source

parameter is specified, the current source is modified.

Query Syntax

:MEASure:XMIN? [<source>]

The :MEASure:XMIN? query measures and returns the horizontal axis

value at which the minimum vertical value occurs. If the optional source is

specified, the current source is modified. If all channels are off, the query

returns 9.9E+37.

Return Format

<value> ::= horizontal value of the minimum in NR3 format

See Also • "Introduction to :MEASure Commands" on page 290

• ":MEASure:XMAX" on page 335

• ":MEASure:TMIN" on page 684

NOTE

:MEASure:XMIN is an alias for :MEASure:TMIN.