Technical data

286 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
5 Commands by Subsystem
:MEASure:FALLtime
[<source>] (see
page 300)
:MEASure:FALLtime?
[<source>] (see
page 300)
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= time in
seconds between the lower and
upper thresholds in NR3 format
:MEASure:FREQuency
[<source>] (see
page 301)
:MEASure:FREQuency?
[<source>] (see
page 301)
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= frequency in
Hertz in NR3 format
:MEASure:NWIDth
[<source>] (see
page 302)
:MEASure:NWIDth?
[<source>] (see
page 302)
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= negative
pulse width in seconds-NR3 format
:MEASure:OVERshoot
[<source>] (see
page 303)
:MEASure:OVERshoot?
[<source>] (see
page 303)
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= the percent of
the overshoot of the selected
waveform in NR3 format
:MEASure:PERiod
[<source>] (see
page 305)
:MEASure:PERiod?
[<source>] (see
page 305)
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= waveform
period in seconds in NR3 format
:MEASure:PHASe
[<source1>]
[,<source2>] (see
page 306)
:MEASure:PHASe?
[<source1>]
[,<source2>] (see
page 306)
<source1,2> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= the phase
angle value in degrees in NR3
format
:MEASure:PREShoot
[<source>] (see
page 307)
:MEASure:PREShoot?
[<source>] (see
page 307)
<source> ::= {CHANnel<n> |
FUNCtion | MATH}
<n> ::= 1-2 or 1-4 in NR1 format
<return_value> ::= the percent of
preshoot of the selected waveform
in NR3 format
Table 62 :MEASure Commands Summary (continued)
Command Query Options and Query Returns