Technical data

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 243
:FUNCtion Commands
Control functions in the measurement/storage module. See "Introduction to
:FUNCtion Commands" on page 245.
Table 58 :FUNCtion Commands Summary
Command Query Options and Query Returns
:FUNCtion:CENTer
<frequency> (see
page 246)
:FUNCtion:CENTer?
(see page 246)
<frequency> ::= the current
center frequency in NR3 format.
The range of legal values is from
0 Hz to 25 GHz.
:FUNCtion:DISPlay {{0
| OFF} | {1 | ON}}
(see page 247)
:FUNCtion:DISPlay?
(see page 247)
{0 | 1}
:FUNCtion:GOFT:OPERat
ion <operation> (see
page 248)
:FUNCtion:GOFT:OPERat
ion? (see page 248)
<operation> ::= {ADD | SUBTract |
MULTiply}
:FUNCtion:GOFT:SOURce
1 <source> (see
page 249)
:FUNCtion:GOFT:SOURce
1? (see page 249)
<source> ::= CHANnel<n>
<n> ::= {1 | 2 | 3 | 4} for 4ch
models
<n> ::= {1 | 2} for 2ch models
:FUNCtion:GOFT:SOURce
2 <source> (see
page 250)
:FUNCtion:GOFT:SOURce
2? (see page 250)
<source> ::= CHANnel<n>
<n> ::= {{1 | 2} | {3 | 4}} for
4ch models, depending on SOURce1
selection
<n> ::= {1 | 2} for 2ch models
:FUNCtion:OFFSet
<offset> (see
page 251)
:FUNCtion:OFFSet?
(see page 251)
<offset> ::= the value at center
screen in NR3 format.
The range of legal values is
+/-10 times the current
sensitivity of the selected
function.
:FUNCtion:OPERation
<operation> (see
page 252)
:FUNCtion:OPERation?
(see page 252)
<operation> ::= {ADD | SUBTract |
MULTiply | INTegrate |
DIFFerentiate | FFT | SQRT}