Technical data

Commands by Subsystem 5

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 173

:STATus

(see page 750)

Query Syntax

:STATus? <source>

<source> ::= {CHANnel<n> | FUNCtion | MATH | SBUS}

<n>::={1|2|3|4}forthefour channel oscilloscope models

<n> ::= {1 | 2} for the two channel oscilloscope models

The :STATus? query reports whether the channel, function, or serial

decode bus specified by <source> is displayed.

Return Format

<value> ::= {1 | 0}

See Also • "Introduction to Root (:) Commands" on page 138

• ":BLANk" on page 144

• ":CHANnel<n>:DISPlay" on page 208

• ":FUNCtion:DISPlay" on page 247

• ":SBUS:DISPlay" on page 401

• ":VIEW" on page 176

NOTE

MATH is an alias for FUNCtion.