Technical data

Commands by Subsystem 5
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 169
:PRINt
(see page 750)
Command Syntax
:PRINt [<options>]
<options> ::= [<print option>][,..,<print option>]
<print option> ::= {COLor | GRAYscale | PRINter0 | BMP8bit | BMP | PNG
| NOFactors | FACTors}
The <print option> parameter may be repeated up to 5 times.
The PRINt command formats the output according to the currently
selected format (device). If an option is not specified, the value selected in
the Print Config menu is used. Refer to ":HARDcopy:FORMat" on page 675
for more information.
See Also • "Introduction to Root (:) Commands" on page 138
• "Introduction to :HARDcopy Commands" on page 261
• ":HARDcopy:FORMat" on page 675
• ":HARDcopy:FACTors" on page 264
• ":HARDcopy:GRAYscale" on page 676
• ":DISPlay:DATA" on page 226